Model 135 - Power

LXP Paired Swinging FRP Door - Power


The accelerated rate of change in clean manufacturing practices, coupled with increased regulation and competitive market forces, has put increasing pressure on facility budgets. Performance and value have become inseparable key words for manufacturers worlwide. Companies producing supplements, nutraceuticals, medical devices, over-the-counter formulations, and many others, face new challenges within their facilities as regulators expand their focus beyond traditional pharmaceutical and biotechnology manufacturing. This LXP  series, paired swinging power operated door system provides an elegant solution to these new challenges.

Request a Quote View Parts
Photos shown may include optional features.

Panel Construction

  • 1-3/4” thick fiberglass panel surface with finished edges of reinforced, pultruded fiberglass.
  • All hinge and hardware locations reinforced with solid resin impregnated pultruded fiberglass.
  • Standard white color. (Other colors available upon request.)

Frame Construction

  • 16 ga., 304 #4 stainless steel, face welded and polished.
  • Available in either single or double rabbet construction.
  • Prepped for a wide variety of hardware options.


  • Grade 1 Architectural hardware standard:
  • Hager BB1191 standard weight stainless steel fully mortised hinges.
  • LCN 4041 heavy-duty closer.
  • Stainless steel push/pull hardware.
  • Frame mounted, three sided bulb type perimeter gasket, center astragal, and bottom sweep gasket.

Performance Features

  • Manual open with standard spring assist closer.
  • Power operation utilizing an electromechanical operator, microprocessor controlled in 120 volt, single phase, with mechanical spring close.
  • Operator completely enclosed within an aluminum flat top shroud.
  • Overhead presence sensor to provide threshold and swing side obstruction detection.
  • Pushplate to open; time delay to close.
  • In case of power failure, door can be opened manually at any time.


  • Vision panel with standard sloped frame.
  • U.L. fire rated.
  • Knock-down frame of pultruded fiberglass construction.
  • All stainless steel construction available in 316L.
  • 14 ga. stainless steel frames.
  • Stainless steel clad panel. (Fire rated and non-rated).
  • Custom designed interlocking system.
  • Hospital stops 4” or 6”.
  • Stainless steel closer cover.  
  • Can provide any major lines and grades of architectural hardware.

Power Model Options

  • Touchless wall-mounted activation switch.
  • Actuators: Variety of activation devices available upon request.


  • One year limited warranty on all components.
Frame Assembly

Frame Assembly

Optional stainless steel frame is fully mitered and completely welded through the throat. Single or double rabbet.

Sloped Shroud for Power Units

Sloped Shroud for Power Units

For superior cleanliness and aesthetic appeal. 

Stainless Steel Closer Cover

Stainless Steel Closer Cover

(Shown on stainless steel fire door) Additional option for superior cleanliness and aesthetic appeal.

Fully Mortised Hinges

Fully Mortised Hinges

Flush mortised hinges provide a clean and smooth finish to the door. 

Complete and Ready to Install

Complete and Ready to Install

Cleanseal doors include your choice of frame, panel, hinges, closer, hardware and optional window packages. 

Access Control

Access Control

Cleanseal doors address the integration of security and interlocking controls, including hardware, software and all external devices