Model 125 - Power

LXP Single Swinging FRP Door - Power


Cleanseal's FRP power operated single swinging, GMP compliant, door is the "no compromise" solution for companies producing neutraceuticals, medical devices, suppliments and over-the-counter formulations. Designed from the ground up to far exceed the offerings of other door manufacturers, yet priced to meet demanding budget constraints, the LXP is truly the "no compromise" clean door solution.

Request a Quote View Parts
Photos shown may include optional features.

Panel Construction

  • 1 3/4” thick fiberglass panel surface with finished edges of reinforced, pultruded fiberglass.
  • All hinge and hardware locations reinforced with solid resin impregnated pultruded fiberglass.
  • Standard white color. (Other colors available upon request.)

Frame Construction

  • 16 ga., 304 #4 stainless steel, face welded and polished.
  • Available in either single or double rabbet construction.
  • Prepped for a wide variety of hardware options.


  • Grade 1 Architectural hardware standard:
  • Hager BB1191 standard weight stainless steel fully mortised hinges.
  • LCN 4041 heavy-duty closer.
  • Stainless steel push/pull hardware.
  • Frame mounted, three sided bulb type perimeter gasket and bottom sweep gasket.

Performance Features

  • Manual open with standard spring assist closer.
  • Power operation utilizing an electromechanical operator, microprocessor controlled in 120 volt, single phase, with mechanical spring close.
  • Operator completely enclosed within an aluminum flat top shroud.
  • Overhead presence sensor to provide threshold and swing side obstruction detection.
  • Pushplate to open; time delay to close.
  • In case of power failure, door can be opened manually at any time.


  • Vision panel with standard sloped frame.
  • UL fire rated.
  • Knock-down frame of pultruded fiberglass construction.
  • All stainless steel construction available in 316L.
  • 14 ga. stainless steel frames.
  • Stainless steel clad panel. (Fire rated and non-rated.)
  • Custom designed interlocking system.
  • Hospital stops 4” or 6”.
  • Stainless steel closer cover.
  • Pultruded fiberglass frame.
  • Can provide any major lines and grades of architectural hardware.

Power Model Options

  • Touchless wall-mounted activation switch.
  • Actuators: Variety of activation devices available upon request.


  • One year limited warranty on all components. 
Concealed/Flush Hardware Option

Concealed/Flush Hardware Option

(Shown on stainless steel door) Exclusive design conceals standard hardware, including maglocks and closers, within the door’s panel and frame. This clean finish option also allows hardware to be pre-mounted at the factory.

Swing Doors for GMP to Class 1 applications

Swing Doors for GMP to Class 1 applications

From GMP guidelines to Class 1 requirements, Cleanseal offers door options to suit your application and budget.

Cleanview Flush Window

Cleanview Flush Window

(Shown on stainless steel door) Whether you need a standard window frame or a flush window, Cleanseal swing doors offer an array of factory installed options. 

Door Frame Detail

Door Frame Detail

Custom engineered for any wall condition in standard double rabbit profile, single rabbit (shown) and with optional hospital stops. 

Complete and Ready to Install

Complete and Ready to Install

Cleanseal doors include your choice of frame, panel, hinges, closer, hardware and optional window packages.